When you’re looking for the perfect sewing machine to learn the basics, the Juki HZL-29Z is a basic mechanical sewing machine with just enough of the modern up to date features to make you’re sewing projects easy to do. The Juki HZL-292 Review.
Anyone starting to sew could use the Juki HZL-29Z very easily, and you will find the stitch quality is better than other machines that are in this class. This is a compact lightweight, that’s easily portable for you’re sewing classes and retreats, and is real simple to use and operate!
The machine has 2 extra front feed dogs to help with the fabric you’re sewing to move smoothly.
Who Is The Juki HZL-29Z For?
Beginners who are looking to learn sewing will love to have a lightweight, easy to use model with the high stitching quality of Juki sewing machines, this model will be the perfect addition to any sewing room that will help beginner and advanced sewers to work on different projects.
Juki HZL-29Z Sewing Machine Review
Below we will mention some of the features found on the 29Z.
The Juki HZL-29Z Comes With 22 Built-In Stitches
The 22 built-in stitches are displayed on the front of the machine, and also the large selector dial.
By turning the stitch selection dial the zigzag width can be adjusted, and for straight stitches either the center needle position or left can be selected.
The maximum stitch width is 6.5 mm, and the maximum stitch length is 4 mm, and it also has the 4 step buttonhole.
On the front of the sewing machine is an over sized reverse stitch lever making it easy to tie off the stitches.
The stitch length can be adjusted by the adjusting dial on the end of the machine just below the hand wheel dial.
For most of the sewing you will find the straight stitch is the most frequently used, and it also has decorative stitches, zigzag and more.
Bobbin and Threading
To wind the bobbin on the 29Z just follow the dotted lines on top of the machine, and thread through bobbin hole then move pin to the right and press on foot controller, stopping bobbin when it slows down or almost full.
This machine has the top loading bobbin system, so just remove the cover and insert bobbin with thread coming off counterclockwise, and follow the guides leaving about 6 inches of thread out, then put cover back on.
To thread the needle follow the numbered arrows down to 5, and use the automatic needle threader, and for easier going set the machine on straight stitching for the threader, and if any problem, just consult the diagrammed instruction manual.
The Juki HLZ-29Z Comes With 2 Presser Feet
This machine has 2 presser feet, the standard multipurpose foot and the buttonhole foot.
For this machine there is a presser foot release lever, you can use to change the feet, and a new one can be snapped into place, and the presser foot lever has 3 positions, with the highest recommended for changing the feet, center position for thicker fabrics and bottom for thinner fabrics.
This machine has the 7 point feed dog system with two of them located in front of the needle entry hole, which will give a consistent, smooth feed of the fabrics you are to sew.
Free Arm And Storage Area
The accessory storage area will slide off giving access to the free arm for sewing cuffs, sleeves, pants, etc.
The machine has an LED light that brightens up the work area especially handy if sewing darker fabrics.
Accessories For The Juki HZL-29Z
- 2 presser feet.
- Spool pin cap.
- Vertical spool pin.
- Seam ripper.
- Screwdrivers – small and large.
- Dust cover.
- Foot control.
- Power cord.
- Instruction Manual.
Specifications for the Juki HLZ-29Z
- 22 stitches.
- 6.5 mm maximum stitch length
- 4 mm maximum stitch length.
- 13 pounds – light enough to be portable.
- 15.275 inches long by 11.023 inches high by 7.795 inches deep.
The Juki HZL-29Z has a 5-year limited manufacturer warranty, with 2 year on the motor and also recommended to check warranty when purchasing.
Pros And Cons
- Stiches are good.
- Feed system works very well.
- Good machine for beginners and even the more experienced sewer.
- Not expensive.
- Adjusting stitch length and width is a bit of a learning curve.
Why Should I Buy The Juki HZL-29Z Sewing Machine?
This sewing machine is made by Juki, designed and built with the features every beginner and advanced sewer needs to work on different projects and it will last for many years in you’re sewing machine room.
If you’re looking for an easy to set up and start sewing model for beginners, this sewing machine is perfect for everyone who is interested to learn to sew.
Why Should I Buy A Juki Sewing Machine From Other Brands?
Juki is a well-known brand that has been designed well, and building sewing machines for sewers for many years, these machines have a high quality stitching.
This brand is well-known around the globe by their industrial and semi industrial sewing machines, but you can be sure they use the same technology to design and build every model for home use also.
Are you looking for a computerized model? You can read the Juki HZL-LB5100 Computerized Sewing Machine Review here!
Where To Buy The Juki HZL-29Z Sewing Machine
You can find this sewing machine on the shelves of specialty shop or with the sewing machine dealer in your area.
Check today’s price on Amazon
Our Closing Thoughts
When it’s time to set this machine up, as in winding the bobbin and threading, then it’s easy enough for anyone starting into to sew.
Choosing the stitches is also easy with the large dial on the front.
About the only problem that might arise is setting the stitch length and width, which might take a small learning curve.
The stitch quality is very good and will sew natural fibers, fine fabrics, knits, synthetic and upholstery with ease.
We would recommend the 29Z for any beginner and would make a good addition to any sewing room.
Wishing you all the best on you’re sewing projects – Happy Sewing.